[01:14:22] [Saint]: i tried to make such cable at some point, but it didn't work for some reason [01:14:44] the idea was to send data to the serial console of emcore with usb commands [01:15:10] basicly using the ipod as a usb-to-uart converter :) [02:35:27] *** Quits: Zelec (~quassel@unaffiliated/zelec) (Remote host closed the connection) [02:36:05] *** Joins: Zelec (~quassel@unaffiliated/zelec) [03:09:56] user890104: while testing the designware driver i noticed that RB support USB serial class defining USB_ENABLE_SERIAL, not tested it yet but will do once the storage and hid are working, i _suppose_ it is intended to use the USB connector at the iPod and through and USB-serial converter connect it to a serial port of some computer (or other equipment) [03:11:58] but what i am currently using is the TTL serial port on iPod 30-pin connector, i am connecting pins 12,13 and 29 (https://www.theiphonewiki.com/wiki/30-pin_Connector) to a USB-serial converter very similar to this one (http://www.dx.com/p/usb-to-uart-5-pin-cp2102-module-serial-converter-81872), and then connect the USB side to an USB port of the computer, then using a terminal you can receive/send data, if you use SERIAL_DEBUG ( [03:11:58] must configure it using ../tools/configure) then all logf() are redirected to the serial port, be sure you use a 3.3V USB-TTL converter, if you use a 5V one possibly your iPod will be damaged, the one i am referring uses 3.3V logic for data pins but it is 5V tolerant so it should be fine, the 5V and 3.3V pins on the converter are not used so must be leaved unconnected, at the Linux computer i am using "screen /dev/ttyUSB0 115200 [03:11:58] " to receive and capture the data, but you can use any other terminal program like minicom or hiperterminal on Windows [04:00:17] *** Quits: TheSeven (~quassel@rockbox/developer/TheSeven) (Ping timeout: 250 seconds) [04:01:39] *** Joins: TheSeven (~quassel@rockbox/developer/TheSeven) [07:57:00] *** Quits: Zelec (~quassel@unaffiliated/zelec) (*.net *.split) [07:57:00] *** Quits: PritchardGSD (~dog@CPE-137-147-154-36.lnse7.win.bigpond.net.au) (*.net *.split) [08:02:56] *** Joins: Zelec (~quassel@unaffiliated/zelec) [08:02:56] *** Joins: PritchardGSD (~dog@CPE-137-147-154-36.lnse7.win.bigpond.net.au) [09:10:57] *** Quits: Zelec (~quassel@unaffiliated/zelec) (*.net *.split) [09:10:57] *** Quits: PritchardGSD (~dog@CPE-137-147-154-36.lnse7.win.bigpond.net.au) (*.net *.split) [09:21:41] *** Joins: Zelec (~quassel@unaffiliated/zelec) [09:21:41] *** Joins: PritchardGSD (~dog@CPE-137-147-154-36.lnse7.win.bigpond.net.au) [09:47:31] *** Quits: Zelec (~quassel@unaffiliated/zelec) (*.net *.split) [09:47:32] *** Quits: PritchardGSD (~dog@CPE-137-147-154-36.lnse7.win.bigpond.net.au) (*.net *.split) [09:54:39] *** Joins: Zelec (~quassel@unaffiliated/zelec) [09:54:39] *** Joins: PritchardGSD (~dog@CPE-137-147-154-36.lnse7.win.bigpond.net.au)